IMPREGARD

IMPREGARD is a solvent-free epoxy resin that restores the sheathing of damaged glass fibers

Need help?

Technical guide
Area calculator
Find a shop

A Nautix Product

Impregnation for composites

IMPREGARD is a solvent-free epoxy resin that restores the sheathing of damaged glass fibers and impregnates delaminated fabrics. Combined with the EPOXYGARD epoxy primer or an epoxy filler, the IMPREGARD resin forms a very effective osmosis curative system while limiting sanding for the applicators.

IMPREGARD fills the microporosities of the support to obtain a uniform base. IMPREGARD can also be used in lamination because the product sticks very well to already cured composites, wets all lamination fabrics and retains a little “flexibility” after hardening, which prevents the repair from peeling off.

Add to wishlist
Technical informations
Safety information
Download the technical sheet It contains detailed information necessary for the correct application of the product and for your safety.
My technical sheet
Application  
Number of coats 1 to 3Area Calculator
Coverage 8-12 m²/L
Substrate Composite | Carbon fiber | Plywood
Thinner Do not thin outSee products
Ask for the safety sheet Safety data sheets are legal information in 16 points. They mainly concern carriers, stockists or professionals using our products. If you are in this case, please fill in the following information to obtain the MSDS of the product.
My safety sheet
Warning  

Advice

Technical guide

In order to support you in your paint system, Nautix offers application cycles adapted to your problem. Find all our step-by-step advice to optimize your painting.

my app step by step

Start

Others products

A3 YACHTING
Antifoulings
Best-seller in the Nautix range of antifoulings, A3 Yachting is recommended for sailboats and motorboats cruising at speeds of less than 30 knots
View product
  • Best Seller
EPOXYGARD
Primers
EPOXYGARD is a two-component epoxy primer used for hull protection and adhesion of antifouling paints.
View product
BLUEFILLER
Epoxy Fillers
BLUEFILLER is a lightweight epoxy filler used to profile or level large areas
View product
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.

Les fiches de données de sécurité sont des informations légales en 16 points. Elles concernent essentiellement les transporteurs, stockistes ou professionnels utilisant nos produits. Si vous êtes dans ce cas, veuillez remplir les informations suivantes pour obtenir la FDDS du produit.

Safety data sheets are legal information in 16 points. They are mainly intended for carriers, wholesalers, or professionals using our products. If you are in this situation, please fill in the following information to obtain the SDS of the product.