• Products

      For over 40 years, the world’s leading skippers and shipyards have been choosing Nautix paints to optimise their performance. Our passion for the sea has taken our company to every ocean in the world.
      Our antifoulings | Pro Painter | For racing

      Preparatory systems before primers enable you to start with a surface that is consistent with the paint application. The surface must first be degreased, sanded or blasted, depending on the substrate and the process selected. It is essential to respect the cycle for optimum cohesion between coats.
      Adhesion promoter | Impregnation | Primers

      Filling in scratches, levelling out deformations, redoing profiles, coatings are used to prepare the surface of your boat.
      Before applying protective or finishing paint, the filler must be applied between two coats of primer, then protected with a multi-layer coating.

      Applying a topcoat is the ultimate step in painting. Our single- or two-component finishing systems will enhance your boat’s appearance and provide a lasting protective barrier against the elements (such as sun, rain, wind and abrasion).
      Undercoats | Topcoats

      Nautix is highly involved in regattas and ocean racing (Mini, Figaro 3, Imoca, Ultim). Our close relationship with many skippers and racing teams has enabled us to understand their needs in terms of performance, glide, sponsorship and safety.

  • Technical guide
  • Area calculator
  • Our advice & inspiration
  • Find a shop
  • Contact

Surface preparation

Nautix offers a range of specific products to prepare your hull. From chemical strippers to polishes to renovate your gelcoat, our products are designed to help you prepare your hull before painting.

Need help?

Define my need.

Which product should I choose?
How do I apply it?

Need help defining your painting cycle and choosing the Nautix products that are suitable for your boat? Nautix provides you with a technical guide that allows you to find the appropriate answers with just a few clicks.

POLISH
Polish
POLISH is a polishing paste for oxidized or tarnished surfaces to revive them
POLISH+
Polish
POLISH+ is a polishing paste for surfaces that enhances their shine after the application of POLISH
STRIPPER
Before painting
STRIPPER is a stripping gel that softens antifouling layers to make them easier to remove
SD
Before painting
SD is a degreaser to clean and prepare surfaces for painting
SCOURING ACID
Before painting
SCOURING ACID prepares metal surfaces such as aluminum before applying protective paint cycles
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.

Contacter
mon commercial

Commercial Contact