• Products

      For over 40 years, the world’s leading skippers and shipyards have been choosing Nautix paints to optimise their performance. Our passion for the sea has taken our company to every ocean in the world.
      Our antifoulings | Pro PainterFor racing

      Preparatory systems before primers enable you to start with a surface that is consistent with the paint application. The surface must first be degreased, sanded or blasted, depending on the substrate and the process selected. It is essential to respect the cycle for optimum cohesion between coats.
      Adhesion promoter | ImpregnationPrimers

      Filling in scratches, levelling out deformations, redoing profiles, coatings are used to prepare the surface of your boat.
      Before applying protective or finishing paint, the filler must be applied between two coats of primer, then protected with a multi-layer coating.

      Applying a topcoat is the ultimate step in painting. Our single- or two-component finishing systems will enhance your boat’s appearance and provide a lasting protective barrier against the elements (such as sun, rain, wind and abrasion).
      Undercoats | Topcoats

      Nautix is highly involved in regattas and ocean racing (Mini, Figaro 3, Imoca, Ultim). Our close relationship with many skippers and racing teams has enabled us to understand their needs in terms of performance, glide, sponsorship and safety.

  • Technical guide
  • Area calculator
  • Our advice & inspiration
  • Find a shop
  • Contact
Our categories
A9000 SPC
Pro painter
Nautix has developed a range of antifoulings for yachting professionals. A9000 SPC is recommended for sailboats, motorboats and superyachts up to 25 knots.
SCOURING ACID
Before painting
SCOURING ACID prepares metal surfaces such as aluminum before applying protective paint cycles
PRO YACHTING
Pro painter
Nautix has developed a range of antifoulings for professionals in the yachting industry. Pro Yachting is recommended for sailboats and motorboats in areas with light fouling.
PERFORMER PRO
Pro painter
Nautix has developed a range of antifoulings for yachting professionals. Performer Pro mixed matrix antifouling is recommended for sailboats and powerboats up to 30 knots.
A88 FORMULA+
Pro painter
Nautix has developed a range of antifoulings for professional paintors. The A88 Formula+ mixed matrix antifouling is recommended for sailboats, speedboats and superyachts.
A4 WHITE
Pro painter
Nautix has developed a range of antifoulings for yachting professionals. A4 White antifouling is recommended for sailboats and powerboats with a cruising speed of over 30 knots or which run aground.
A4 FORMULA+
Pro painter
Nautix has developed a range of antifoulings for yachting professionals. A4 Formula+ antifouling is recommended for sailboats and powerboats with a cruising speed of over 30 knots or which run aground.
A3 WHITE
Pro painter
Nautix has developed a range of antifoulings for professional paintors. A3 White ablative antifouling is recommended for sailboats and motorboats with a cruising speed of less than 30 knots.
A3 FORMULA +
Pro painter
Nautix has developed a range of antifoulings for professional paintors. A3 Formula+ ablative antifouling is recommended for sailboats and motorboats cruising at speeds of less than 30 knots.
NX 194
Race
Specifically for foils and appendages, NX 194 epoxy paint provides a smooth, abrasion-resistant finish.
WHITE T.SPEED
Race
A finishing paint for hulls and freeboards, WHITE T.SPEED has excellent gliding properties and excellent tension.
MARIN YACHTING
Antifoulings
Marin Yachting is a multi-purpose antifouling recommended for sailboats, fishing boats and motorboats.
PERFORMER YACHTING HARD MATRIX
Antifoulings
Performer Yachting Hard Matrix is a versatile antifouling recommended for areas with moderate currents or moderately fouled waters.
PERFORMER YACHTING ABLATIVE MATRIX
Antifoulings
Performer Yachting Ablative Matrix is a versatile antifouling recommended for areas with moderate currents or moderately fouled waters.
DB
Topcoats
Satin-finish and resistant, DB marine paint is a highly opaque coating for holds, lockers and bottoms.
COOLBLACK
Topcoats
Innovation linked to the requirements of offshore racing, COOLBLACK is a "cold" polyurethane topcoat that reduces heat absorption in boat cabins
WS
Thinners
WS Cleaner-Thinner can be used with all Nautix one-component finishes
SD
Before painting
SD is a degreaser to clean and prepare surfaces for painting
A9 T.SPEED
For racing
Fluorescent, A9 T.SPEED is a special glide hard matrix antifouling recommended for keels and appendages on racing yachts.
EPOXYCOAT
Topcoats
Versatile, EPOXYCOAT epoxy topcoat can be used in fresh water and salt water to protect your hull
P7
Primers
P7 is a protective primer used for new Z-Drive propellers and drives or on which the paint is in good condition
STRIPPER
Before painting
STRIPPER is a stripping gel that softens antifouling layers to make them easier to remove
PINHOLE FILLER
Epoxy Fillers
PINHOLE FILLER is an epoxy filler designed specifically for carbon surfaces
WATERTIGHT
Epoxy Fillers
Best-selling Nautix epoxy filler, WATERTIGHT is a finishing filler for small defects and scratches
DP
Thinners
DP Cleaner-Thinner can be used with all Nautix two-component finishes
DE
Thinners
DE Cleaner-Thinner can be used with all Nautix epoxy paints
DA
Thinners
DA Thinner-Cleaner can be used with all Nautix antifoulings
POLISH+
Polish
POLISH+ is a polishing paste for surfaces that enhances their shine after the application of POLISH
PA
Primers
PA primer is a high-performance anti-corrosion paint for metal and cast iron keels.
PO
Primers
PO is a single-component primer used to prevent osmosis but also in difficult application conditions: cold, damp weather, etc.
U2
Undercoats
U2 is a two-component opacifying epoxy undercoat to increase the gloss of topcoats
P1
Primers
To create a simple bond on GRP or wood, Nautix recommends P1 primer.
PE
Primers
Suitable for the preparation of racing hulls, the PE epoxy primer forms a thin, very hard film to promote the adhesion of A4 T.SPEED antifouling.
HPE
Primers
The HPE epoxy primer with high filling power promotes the grip and protection of your hull
EPOXYGARD
Primers
EPOXYGARD is a two-component epoxy primer used for hull protection and adhesion of antifouling paints.
IMPREWOOD
Impregnation
IMPREWOOD fills the pores in wood and concrete surfaces to create a hard base before applying primer or varnish.
IMPREGARD
Impregnation
IMPREGARD is a solvent-free epoxy resin that restores the sheathing of damaged glass fibers
IA
Impregnation
IA is a pore-filling impregnating paint for cast iron used to fill microporosities and obtain a uniform base.
METATHANE
Adhesion promoter
An innovative and exclusive product, METATHANE is an adhesion promoter for polyurethane finishes on metal surfaces.
A4 T.SPEED
For racing
Popular with ocean racers, A4 T.SPEED is a hard matrix antifouling specially recommended for racing yachts and speedboats.
L2
Topcoats
The two-component L2 polyurethane topcoat guarantees a beautiful shine and long-lasting color on your boat
VA2
Varnishes
VA2 is a colorless two-component polyurethane varnish with high gloss and perfect tension
STARWOOD
Varnishes
STARWOOD is a single-component varnish for the protection and shine of wood in the marine environment
GRIP ADDITIVE
Non-skid paints
GRIP ADDITIVE is an anti-slip compounds to incorporate into your topcoat or varnish
A8
Antifoulings
Designed specifically for RIBs, A8 hard matrix antifouling is recommended for inflatable hulls and tubes.
BLUEFILLER
Epoxy Fillers
BLUEFILLER is a lightweight epoxy filler used to profile or level large areas
NAUTIX GRIP
Non-skid paints
NAUTIX GRIP is a translucent non-slip paint ideal for heavily used areas
DECK GRIP
Non-skid paints
DECK GRIP is a one-component non-slip paint ready to use and easy to apply
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.

Contacter
mon commercial

Commercial Contact