A7T. Speed antifouling is a hard matrix antifouling formulated specifically for propellers and Z-Drive.
While the A7 spray (500mL) makes for a very nice application, the film thickness per coat remains very thin. It is therefore necessary to apply at least 4 to 5 coats to obtain a sufficient biocide “tank”. The A7 in a 0.35L can makes it possible to obtain this thickness in only 2 to 3 coats.
Choose the product that suits you!
PREPARATION
- Scrape off the old paint layers
- If necessary, apply a spray primer P7
APPLICATION
- Start antifouling job with the propeller by applying a first coat of antifouling.
- While waiting to dry, apply your antifouling on half of the hull, going up towards the bow
- Go back to the propeller and apply a new coat
- Apply your antifouling to the second half of your hull
- Go back to the propeller and apply a new coat
- So on and so forth 🙂
