• Products

      For over 40 years, the world’s leading skippers and shipyards have been choosing Nautix paints to optimise their performance. Our passion for the sea has taken our company to every ocean in the world.
      Our antifoulings | Pro Painter | For racing

      Preparatory systems before primers enable you to start with a surface that is consistent with the paint application. The surface must first be degreased, sanded or blasted, depending on the substrate and the process selected. It is essential to respect the cycle for optimum cohesion between coats.
      Adhesion promoter | Impregnation | Primers

      Filling in scratches, levelling out deformations, redoing profiles, coatings are used to prepare the surface of your boat.
      Before applying protective or finishing paint, the filler must be applied between two coats of primer, then protected with a multi-layer coating.

      Applying a topcoat is the ultimate step in painting. Our single- or two-component finishing systems will enhance your boat’s appearance and provide a lasting protective barrier against the elements (such as sun, rain, wind and abrasion).
      Undercoats | Topcoats

      Nautix is highly involved in regattas and ocean racing (Mini, Figaro 3, Imoca, Ultim). Our close relationship with many skippers and racing teams has enabled us to understand their needs in terms of performance, glide, sponsorship and safety.

  • Technical guide
  • Area calculator
  • Our advice & inspiration
  • Find a shop
  • Contact

Non-slip: which one to choose?

Would you like to repaint your deck to make it slip-resistant?

Deck Grip

Single-component paint for refits.
Opacifying, easy to apply and quick-drying, it gives feet a good grip without damaging clothes. Available in white or light grey, it has a low sheen to limit the effect of reverberation. Good value for money.

Grip Additive

Anti-slip compounds to mix with single- or two-component topcoat.
This solution makes it easy to choose the colour while adjusting the type of grip and durability. The bi-component solution is preferred for greater durability. Nautix offers 2 types of compounds: medium or hard.

Nautix Grip

Ready-to-use, two-component, transparent anti-slip.
This solution gives the best adhesion. Widely used on sailboards, this paint is also recommended for cockpits. However, beware of abrasion of waxed surfaces and skin.

In all cases, surface preparation and, above all, application are essential.
If the paint is too thin or too tight, the ball will jump. The wrong mix ratio will result in a slippery surface.

Anti-slip effectiveness can be improved by applying 2 coats.

Share

Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.

Contacter
mon commercial

Commercial Contact