STRIPPER

STRIPPER is a stripping gel that softens antifouling layers to make them easier to remove

Need help?

A Nautix Product

Stripper gel for antifouling

STRIPPER is a stripping gel based on Watertech® technology. This stripper impregnates and softens the coats of antifouling and monocomponent paints.

This gel is neutral on gelcoat, as it does not contain acids or bases. Tinted in white, it allows the applied areas to be clearly seen. One application corresponds to approximately 2-3 coats of antifouling.

Download the technical sheet It contains detailed information necessary for the correct application of the product and for your safety.
Application  
Number of coats -Area Calculator
Coverage 3 m²/L
Thinner Do not thin outSee products
Ask for the safety sheet Safety data sheets are legal information in 16 points. They mainly concern carriers, stockists or professionals using our products. If you are in this case, please fill in the following information to obtain the MSDS of the product.

Advice

Technical guide

In order to support you in your paint system, Nautix offers application cycles adapted to your problem. Find all our step-by-step advice to optimize your painting.

my app step by step

Others products

PE
Primers
Suitable for the preparation of racing hulls, the PE epoxy primer forms a thin, very hard film to promote the adhesion of A4 T.SPEED antifouling.
SD
Before painting
SD is a degreaser to clean and prepare surfaces for painting
DA
Thinners
DA Thinner-Cleaner can be used with all Nautix antifoulings
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.

Les fiches de données de sécurité sont des informations légales en 16 points. Elles concernent essentiellement les transporteurs, stockistes ou professionnels utilisant nos produits. Si vous êtes dans ce cas, veuillez remplir les informations suivantes pour obtenir la FDDS du produit.

Safety data sheets are legal information in 16 points. They are mainly intended for carriers, wholesalers, or professionals using our products. If you are in this situation, please fill in the following information to obtain the SDS of the product.