• Products

      For over 40 years, the world’s leading skippers and shipyards have been choosing Nautix paints to optimise their performance. Our passion for the sea has taken our company to every ocean in the world.
      Our antifoulings | Pro PainterFor racing

      Preparatory systems before primers enable you to start with a surface that is consistent with the paint application. The surface must first be degreased, sanded or blasted, depending on the substrate and the process selected. It is essential to respect the cycle for optimum cohesion between coats.
      Adhesion promoter | ImpregnationPrimers

      Filling in scratches, levelling out deformations, redoing profiles, coatings are used to prepare the surface of your boat.
      Before applying protective or finishing paint, the filler must be applied between two coats of primer, then protected with a multi-layer coating.

      Applying a topcoat is the ultimate step in painting. Our single- or two-component finishing systems will enhance your boat’s appearance and provide a lasting protective barrier against the elements (such as sun, rain, wind and abrasion).
      Undercoats | Topcoats

      Nautix is highly involved in regattas and ocean racing (Mini, Figaro 3, Imoca, Ultim). Our close relationship with many skippers and racing teams has enabled us to understand their needs in terms of performance, glide, sponsorship and safety.

  • Technical guide
  • Area calculator
  • Our advice & inspiration
  • Find a shop
  • Contact

A4 YACHTING

The best-seller in the Nautix range of antifoulings, A4 Yachting is recommended for sailboats and powerboats cruising at speeds of over 30 knots or which run aground.

Need help?

A Nautix Product

High performance hard matrix antifouling

A4 Yachting is a high-performance hard matrix antifouling recommended for sailboats, fishing boats, speedboats and boats that are beached or on trailers. Its optimised formula gives it a high level of effectiveness against fouling.

Nautix always recommends applying 2 coats of antifouling. Never apply a hard matrix antifouling over an ablative.

Nautix produces A4 Yachting antifouling in Europe.

Use biocides with care. Read the label and product information before use. Observe the precautions for use.

Download the technical sheet It contains detailed information necessary for the correct application of the product and for your safety.
Application  
Number of coats 2Area Calculator
Coverage 10 m²/L
Substrate GRP | Wood | Steel
Thinner DASee products
Ask for the safety sheet Safety data sheets are legal information in 16 points. They mainly concern carriers, stockists or professionals using our products. If you are in this case, please fill in the following information to obtain the MSDS of the product.
Warning  

Advice

Previous
Next

Technical guide

In order to support you in your paint system, Nautix offers application cycles adapted to your problem. Find all our step-by-step advice to optimize your painting.

my app step by step

Others products

P1
Primers
To create a simple bond on GRP or wood, Nautix recommends P1 primer.
HPE
Primers
The HPE epoxy primer with high filling power promotes the grip and protection of your hull
DA
Thinners
DA Thinner-Cleaner can be used with all Nautix antifoulings
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.

Contacter
mon commercial

Les fiches de données de sécurité sont des informations légales en 16 points. Elles concernent essentiellement les transporteurs, stockistes ou professionnels utilisant nos produits. Si vous êtes dans ce cas, veuillez remplir les informations suivantes pour obtenir la FDDS du produit.

Commercial Contact

Safety data sheets are legal information in 16 points. They are mainly intended for carriers, wholesalers, or professionals using our products. If you are in this situation, please fill in the following information to obtain the SDS of the product.